StudioLive VSL-AI Explained
The PreSonus StudioLive AI digital mixer and software package is hands down an industry leading mixing solution. This series by PreSonus master Bill Edstrom focuses on the powerful and way cool VSL-AI software used to control the digital hardware mixer. See and hear all that this winning combination of hardware and software can do!
VSL-AI (Virtual StudioLive AI) unlocks the tremendous remote control and networking capability your StudioLive AI mixer. Along with the Universal Control AI driver, VSL-AI provides a powerful suite of remote control, room analysis, and preset management. It also enables using your StudioLive AI mixer as an audio interface for recording and mixing! This series covers VSL-AI for all three mixers in the series – StudioLive 16.4.2 AI, StudioLive 24.4.2 AI, and the StudioLive 32.4.2 AI.
Bill starts off with an introduction covering what you’re going to learn and gives an overview of the capabilities of the VSL-AI software. Next, you’ll see how to install the software on both Mac and PC, connect via Firewire, Ethernet or WiFi, and get an in-depth look at both the Universal Control and VSL-AI Mixer.
Mark the Release MAGNETRiXX 27 MAY 2015 | 637 MB
Vote, and then, in comments leave a review, if you want or you can spend a few minutes ... .. go to expression ...
Bill then shows you how to perform an Output Check to verify your stage setup is wired correctly, how to dial in System Delay for speakers that are further away from your main speakers, and do Room Analysis to tune your mix so it sounds right in any room. Moving on, Bill gets into Mixing with VSL-AI. You’ll learn all the different Channel Controls such HP Filter, Routing, Copying, Gain Reduction, Meter, Naming, Channel Copy, the Fat Channel and more.
Mastering the Master Section is next and William covers it all including Aux and FX Panels, Mute Groups, and Mix Screens. The VSL Browser is then examined in detail and Bill shows you how to Back Up your Mixer’s memory to your computer, Work with Scenes, Save and Load Fat Channel, FX and GEQ Presets, and how to Lock Out the board with a secret setting option so curious hands do no harm!
Bill then wraps up the series with Tips & Tricks tutorials covering a diverse selection of topics such as Ringing Out your Monitors, Setting the Gate Key Filter, and 2-Track Playback from your Mac & PC. As a bonus, Bill throws in some videos on Studio One and StudioLive Basics such as Auxiliary Inputs Router Explained, Recording with Studio One, Mixing Down and more!
If you have a StudioLive AI mixer, you have to get into the VSL-AI software to take this board to the next level. You’ll see a whole new wold of digital mixing open up before your very eyes… Watch “StudioLive VSL-AI Explained” today!
- 31 Tutorials / 2hrs 57min Total Runtime
- For all beginner to intermediate StudioLive VSL-AI users
- Tutorials written by Studio Live AI Expert Bill Edstrom
- Simple to use video control interface for Mac & PC
- Watch Online, Download, Stream to iPad, iPhone & iPod
-- Uploaded.net ------ Rapidgator.net ------ Uploadgig.com --
▼▼▼▼▼▼▼▼▼ GO TO PASTECLIK ▼▼▼▼▼▼▼▼▼
- MORE INFO- http://q.gs/8UWru -
BEST PREMIUM FOR THE MOMENT
DOWNLOAD: TUTS-StudioLive VSL-AI Explained TUTORiAL-MAGNETRiXX- GO TO SOURCE…